Profile depth
The overall front-to-back frame dimension. Deeper profiles may support larger insulating zones, glazing pockets, tracks, reinforcement, or multi-panel movement.
Frame profile guide
The profile controls more than the look.
Frame depth, visible aluminum, thermal separation, glazing pocket, sill, tracks, and hardware all change with the profile family.
65-239 mmPlatform-depth directions20-64 mmVisible-width references
Understand the drawing
Four dimensions shape the opening.
A deeper profile is not automatically better, and a slimmer profile is not automatically weaker. The right choice depends on operation, panel size, glass, exposure, sill strategy, hardware, and the documentation required for the project.
Visible sightline
The aluminum seen around the glass or where panels meet. A narrower sightline increases the glass-to-frame ratio, but it does not by itself define performance.
Thermal break
An insulating barrier separating interior and exterior aluminum. Its design works with glass, spacers, seals, size, and installation to shape whole-unit performance.
Sill + track geometry
The bottom profile manages movement, drainage, weather seals, accessibility, and screen coordination. Low-profile and higher-weathering directions involve tradeoffs.
Profile families
Compare the platform before choosing the finish.
These references organize the available directions without turning a catalog number into a performance promise. Final dimensions and documentation are confirmed for the exact unit.
Thermal windows01
65 Thermal Window Profile
A balanced thermally broken platform for clean residential casement, awning, fixed, and combination window elevations.
- Profile depth
- 65 mm
- Visible reference
- Approx. 30 mm
- Glass reference
- Up to 48 mm reference
- Thermal direction
- 24 mm thermal barrier
- Casement + awning windows
- Fixed and operable combinations
- Balanced depth and sightline
Enhanced thermal windows02
80 Deep Thermal Window Profile
A deeper window platform with a wider insulating zone and additional glazing capacity for more demanding project goals.
- Profile depth
- Approx. 80 mm
- Visible reference
- Approx. 30 mm
- Glass reference
- Up to 61 mm reference
- Thermal direction
- 39 mm thermal barrier
- Thermal design priorities
- Thicker insulating glass
- Casement, awning + fixed units
Thermal swing doors03
80 Thermal Hinged Door Profile
A substantial hinged-door platform for inward or outward swing, multi-point locking, and project-specific threshold conditions.
- Profile depth
- 80 mm
- Visible reference
- Approx. 50 mm
- Glass reference
- Up to 48 mm reference
- Thermal direction
- Thermally broken platform
- Single and French doors
- Low- or high-threshold layouts
- Glazed door and sidelite packages
Minimal sliding doors04
146 Slim Sliding Profile
A minimal sliding platform that reduces the vertical interlock and emphasizes uninterrupted glass across large openings.
- Profile depth
- 146 mm platform
- Visible reference
- Approx. 20 mm interlock
- Glass reference
- By panel engineering
- Thermal direction
- High glass-to-frame ratio
- Minimal architectural sightlines
- Large view openings
- Concealed-roller sliding layouts
Thermal folding doors05
75 Thermal Folding Profile
A folding-door profile that balances narrow panel stiles with the hinge strength, glazing depth, and sill choices needed for multi-leaf openings.
- Profile depth
- 75 mm
- Visible reference
- Approx. 36 mm
- Glass reference
- Up to 51 mm reference
- Thermal direction
- Thermally broken platform
- Two- to eight-leaf layouts
- Left, right, or split stacks
- Low- and standard-sill options
Thermal lift + slide06
153 Lift + Slide Profile
A thermal lift-slide platform for oversized glass panels, secure compression sealing, and lower-sill design directions.
- Profile depth
- 153 mm
- Visible reference
- Approx. 64 mm
- Glass reference
- Up to 53 mm reference
- Thermal direction
- Thermally broken platform
- Large two-panel openings
- Sliding + fixed combinations
- Premium residential glass walls
Deep multi-track lift + slide07
239 Multi-Track Lift + Slide Profile
A deeper lift-slide platform that creates room for multi-track stacking arrangements while retaining the same refined vertical sightline direction.
- Profile depth
- 239 mm
- Visible reference
- Approx. 64 mm
- Glass reference
- Up to 53 mm reference
- Thermal direction
- Thermally broken platform
- Multi-track stackers
- Broad clear-opening goals
- Large-format panel packages
Commercial profiles08
100-150 Commercial Platforms
Operation-specific commercial profiles for awning windows, hinged entrances, sliders, stackers, louvers, and folding doors.
- Profile depth
- 100-150 mm range
- Visible reference
- Approx. 25-50 mm
- Glass reference
- Varies by operation
- Thermal direction
- Standard or project-specific
- Retail and hospitality openings
- High-use entrances
- Operation-specific commercial detailing
Profile depths, visible widths, thermal-barrier dimensions, and glazing capacities are general platform references. They are not rough-opening dimensions, glass-edge dimensions, whole-unit ratings, or guaranteed limits. Final configuration, drawings, performance documentation, sill, hardware, and availability are confirmed for each project.
North American proof
Compare performance using verified numbers.
Selected available configurations have current North American directory and approval evidence. The fair comparison is product to product: matching operator type, size, glass, test method, and installation basis.
U-factor
Select thermally broken configurations can reach U-factors as low as 0.13. The exact whole-unit value is confirmed for the quoted configuration.
Florida design pressure
A selected impact-resistant horizontal slider is approved for both HVHZ and non-HVHZ use at +55/-55 psf.
North American framework
Thermal values and fenestration performance are evaluated through the same North American standards used for premium U.S. systems.
These are configuration-specific examples, not blanket ratings for every profile. BelleVier matches the applicable label, approval, test report, glass, operator type, size, anchorage, and installation requirements to the quoted unit before a value becomes a project claim.
Selection sequence
Choose the operation first. Then match the profile.
- 01Define movement
Fixed, swing, slide, lift-slide, fold, or automatic operation.
- 02Set the visual goal
Sightline, panel rhythm, glass area, finish, and interior/exterior alignment.
- 03Name the performance needs
Thermal, air, water, structural, acoustical, safety, or accessibility criteria.
- 04Confirm the exact package
Profile, glass, sill, hardware, reinforcement, drawings, and project-specific documents.
Start with your plans
Let's make the opening work.
Send a plan set, rough opening list, or even an early concept. We'll help identify the right next step.